Pip Mode - ATEN CM1284 User Manual

Multi-View KVMP™ Switch User Manual

PiP Mode

The PiP Mode command allows you to change the Picture in Picture display
mode settings. Type your command in the following format:
Picture in Picture Dual Mode Setting:
Command + Control1 + Control2 + [Enter]
Picture in Picture Triple Mode Setting:
Command + Control1 + Control2 + Control3 + [Enter]
Picture in Picture Quad Mode Setting:
Command + Control1 + Control2 + Control3 + Control4 + [Enter]
Command
pip2
pip3
pip4
Control
cxpy
For example, to set Picture in Picture Dual Mode, you must configure the four
channels, and type the following:
pip2 c1p1 c2p2 [Enter]
For example, to set Picture in Picture Triple Mode, you must configure the four
channels, and type the following:
pip3 c1p1 c2p2 c3p3 [Enter]
For example, to set Picture in Picture Quad Mode, you must configure the four
channels, and type the following:
pip4 c1p1 c2p2 c3p3 c4p4 [Enter]
Note: 1. Each command string can be separated with a space.
2. The Port Number command string can be skipped, and the default
value will be used.
3. To avoid RS-232 command loss, it is recommended to enter every
RS-232 command with a two-second gap.
78
Picture in Picture Dual Mode
Picture in Picture Triple Mode
Picture in Picture Quad Mode
c: Output channel, x= 1~4
p: Input port, y= 1~4
Example: c2p4
Description
Description