Powering Off And Restarting; Restoring To Default Settings - ATEN CM1284 User Manual

Multi-View KVMP™ Switch User Manual

Powering Off and Restarting

If it becomes necessary to power off the unit, before starting it back up you
must do the following:
1. Shut down all the computers that are attached to the switch.
2. Unplug the switch's power adapter cable.
3. Wait 10 seconds, then plug the switch's power adapter cable back in.
4. After the switch is up, Power On the computers.

Restoring to Default Settings

To reset your complete KVM installation to the default settings, configure the
Reset to Default setting to Yes in the OSD Menu.
116