Switch Port (Usb Peripherals Focus Only) - ATEN CM1284 User Manual

Switch Port (USB Peripherals Focus only)

The switch port command allows you to switch the USB peripheral focus
between computers connected to the Multi-View KVMP™ Switch's ports.
Type your command in the following format:
Command + Input Command + [Enter]
Command
sw
Input Command
ux Input port number,
x= 1~4 (Default: 1)
Example: u2
For example, to switch the USB peripheral focus to port 2, type the following:
sw u2 [Enter]
Note: 1. Each command string can be separated with a space.
2. The Port Number command string can be skipped, and the default
value will be used.
3. To avoid RS-232 command loss, it is recommended to enter every
RS-232 command with a two-second gap.
Switch Port Command
Chapter 6. RS-232 Operation
Description
Description
75