Activate Beeper - ATEN CM1284 User Manual

Multi-View KVMP™ Switch User Manual

Activate Beeper

The Activate Beeper command allows you to enable/disable the beeper
function. Type your command in the following format:
Command + Control + [Enter]
Command
beeper
Control
off
on
For example, to enable the beeper, type the following:
beeper on [Enter]
Note: 1. Each command string can be separated with a space.
2. To avoid RS-232 command loss, it is recommended to enter every
RS-232 command with a two-second gap.
96
Activate Beeper Command
Disable beeper
Enable beeper
Description
Description