Table of Contents
Advertisement
Setting
Mouse Emulation
Mouse Wheel
Switching
Power On Detection Enable / Disable
Password
Password Protection Enable / Disable
Change Password
Maintenance
Firmware Upgrades
Save Configuration
Load Configuration
Reset to Default
MFG No.
Options
Enable / Disable
Enable / Disable
Enable / Disable
Profile 1 / Profile 2 /
Profile 3 / Profile 4
Profile 1 / Profile 2 /
Profile 3 / Profile 4
Read-only information
Chapter 5. OSD Operation
Description
Enable mouse emulation to allow for
error-free booting. Mouse emulation
must be enabled for Hardware Cursor
Mode, Channel Wheel Mode, and
Mouse Switching to work.
Enable this function to allow the mouse
wheel to switch to the next port when it
is clicked twice.
Note: This function applies to 3-key
USB wheel mice only.
Enable this function to have the Multi-
View KVMP™ Switch switch to the next
powered-on computer when a
computer that has KVM focus is
powered off.
Enable this function to password
protect access to the OSD Menu. The
default password is password.
Enable this function to change the login
password for the OSD Menu. This
setting is only available when
Password Protection is enabled.
Note: The password is case-sensitive
and only supports English alphabets
and/or numeric characters.
Select to perform a firmware upgrade.
For details about firmware upgrades,
see Firmware Upgrades, page 109.
Select an option to back up the current
OSD configuration.
Select an option load a previously
backed up OSD configuration.
Select to set the Multi-View KVMP™
Switch to default.
Displays the manufacturing code of the
Multi-View KVMP™ Switch.
65
Advertisement
Table of Contents
