Air Cleaner; Spark Plug - KYMCO AHG5 Service Manual

3. PERIODIC MAINTENANCE

5. Air Cleaner

1. Remove the screws from the air cleaner
cover, and then remove air cleaner
cover.
2. Remove screws from the air cleaner
element, then remove and discard this
air cleaner element.
3. The new air cleaner element installation
is in the reverse order of removal.
Use the KYMCO genuine air cleaner
element or an equivalent air cleaner element
specified for your model. Using the wrong
KYMCO air cleaner
non-KYMCO air cleaner element which is
not of equivalent
premature engine wear or performance
problems.
 The air cleaner should be serviced at
regular intervals.
frequently when riding in unusually
wet or dusty areas.

6. Spark Plug

Remove the spark plug cap and spark plug
Check the spark plug for wear and fouling
deposits.
Clean any fouling deposits with a spark plug
cleaner or a wire brush.
Specified Spark Plug: CPR7E (NGK)
Measure the spark plug gap.
Spark Plug Gap: 0.7~0.8 mm
 When installing, first screw in the
spark plug by hand and then tighten
it with a spark plug wrench.
Torque: 0.8~1.2 kgf-m (8~12 N-m)
element or
quality may cause
Service more
a
Gap
｝
Wear
Fouling
Deposits
3-7
DT X360
Cracks
Damage
Deformation
0.7~0.8mm