License Plate Light; Speed Sensors; Front Speed Sensor - KYMCO AHG5 Service Manual

19. ELECTRICAL SYSTEM
DT X360

3.2. License Plate Light

Remove the rear light assy.
Remove the screws.
Remove the license plate light.
Remove the screws.
Push and turn the bulb counterclockwise to
remove it, and then replace with a new one.
Specification: 12V 5W
Installation is in the reverse order of
removal.

4. Speed Sensors

4.1. Front Speed Sensor

Remove the front cover.
Disconnect the speed sensor connector.
Remove the bolt.
Remove the speed sensor.
Install in the reverse order of removal.
19-6