3. PERIODIC MAINTENANCE
10.
Transmission Oil
10.1. Oil change
1. Place the scooter in its center stand.
2. Place a drain pan under the drain bolt
(1).
3. Remove the transmission oil drain bolt.
4. Remove the transmission oil filler bolt
(2), slowly turn the rear wheel and drain
the oil.
After draining the oil completely, install
the oil drain bolt with a new sealing
washer and tighten it.
Torque: 1.0kgf-m
5. Fill
the
transmission
recommended oil.
Recommended transmission oil:
SAE 90
Oil capacity (at draining): 0.2 liter
6. Install the transmission oil filler bolt with
a new sealing washer and tighten it.
Torque: 1.0kgf-m
case
with
3-15
DT X360