KYMCO AHG5 Service Manual page 90

6. CYLINDER HEAD/ VALVE
DT X360
Install the camshaft set plate so it fits into the groove on the camshaft and between the
projections on the rocker arm shafts.
Apply a small amount of blue Loctite (non-permanent) to the threads of the set plate bolt.
Thread in the bolt and tighten it to specification with a 5 mm Allen socket.
Torque
Thread
Item Qty
size (mm)
kgf-m lb-ft
Camshaft set plate bolt 1 1.2 2.0
6-19