Secondary Air Cleaner/Air Injection Control Valve (A.i.c.v.) - KYMCO GRAND DINK 50 Service Manual

17
. EXHAUST EMISSION CONTROL
SYSTEM
SECONDARY AIR CLEANER / AIR
INJECTION CONTROL VALVE (A.I.C.V.)
REMOVAL
Remove the seat. ( Ö 2-4)
Remove the body cover.
Disconnect the secondary air cleaner
/(A.I.C.V) connecting tube.
INSPECTION
Remove two screws on the air cleaner/air
injection control valve.
Replace new one when the filter elements
obstruct considerable dirt.
INSTALLATION
The installation sequence is the reverse of
removal.
• •
x The secondary air cleaner must be
assembled and installed properly to
avoid dust entering the air cleaner.
x When installing, be careful not to
bend or twist the tubes and check for
proper installation.
x The tube length is very important to
its performance, use the tube of
same specification for replacement.
Secondary Air Cleaner / A.I.C.V.
Air Inlet Tube
Air Outlet Tube
Air Inlet Tube
GRAND DINK 50
17-3