12. COOLING SYSTEM
DT X360
8. THERMOSTAT
8.1. Removal
Drain the coolant.
Remove the luggage box.
Disconnect the water hose (1) from the
thermostat housing.
Remove the mounting bolts (2) and the
thermostat housing from the cylinder head.
(2)
8.2. Installation
The installation sequence is the reverse of
removal.
After the water thermostat has been
installed,
fill
coolant
and
perform air
bleeding.
8.3. Disassembly
Remove the two bolts and separate the
thermostat housing halves.
Remove the thermostat from the thermostat
housing.
Thermostat
12-16