15. REAR ASSEMBLY
2. SERVICE INFORMATION
2.1.
GENERAL INSTRUCTIONS
When performing the services stated in this section, the engine and exhaust muffler
must be cold to avoid scalding.
During servicing, keep oil or grease off the brake pads and brake disk.
2.2.
SPECIFICATIONS
Rear wheel rim runout
Rear brake disk thickness
Rear brake disk runout
Rear brake master cylinder I.D.
Rear brake master cylinder piston O.D.
2.3.
TORQUE VALUES
Exhaust muffler lock bolt
Exhaust muffler pipe nut
Rear axle nut
Rear shock absorber lower mount bolt
Rear shock absorber upper mount bolt
Rear brake caliper holder bolt
Item
Item
Standard (mm)
---
5.0
---
27.00
26.95
120 N-m
15-3
DT X360
Service Limit (mm)
2.0
4.0
0.3
Value
kgf•m
N-m
5 kgf•m
50 N-m
2 kgf•m
20 N-m
12 kgf•m
4 kgf•m
40N-m
4 kgf•m
40N-m
3.5 kgf•m
35 N-m