Disassembly - KYMCO AHG5 Service Manual

14. FRONT ASSEMBLY
DT X360
7.3.

Disassembly

Switches
Remove the two screws from right
handlebar switch.
Disconnect the throttle cables and free the
right switch housing from the handlebar.
Remove the two screws and then remove
the left handlebar switch.
Disconnect the switch. Separate the left
switch housing from the handlebar.
Bar ends
Remove the bar ends with a 6 mm Allen.
Grips
Remove the right handlebar switch.
Disconnect the throttle cable from the
throttle grip.
Remove the throttle grip.
14-14