4. LUBRICATION SYSTEM
2. SERVICE INFORMATION
2.1. GENERAL INSTRUCTIONS
The maintenance of lubrication system can be performed with the engine
installed in the frame.
Drain the coolant before starting any operations.
Use care when removing and installing the oil pump not to allow dust and
foreign matters to enter the engine and oil line.
Do not attempt to disassemble the oil pump. The oil pump must be replaced
as a set when it reaches its service limit.
After the oil pump is installed, check each part for oil leaks.
2.2. SPECIFICATIONS
ENGINE OIL
Engine Oil Capacity
Recommended Oil
At disassembly
At change
4-4
DT X360
1.5 liter
1.3 liter
SAE 5W50
API: SJ