Leg Shield; Handlebar Covers - KYMCO AHG5 Service Manual

2. External components, Exhaust pipe
2.11.

Leg shield

Remove the bolt on each side of the cover.
Remove the cable of the fuel filling cap cover.
Remove the leg shield.
Install in the reverse of work.
2.12.

Handlebar covers

Remove the bolts on each side of lower
handlebar cover.
Disconnect the USB connector.
Remove the upper handlebar cover.
Remove the throttle cables.
Remove the screws on the lower handlebar
cover.
Remove the lower handlebar cover.
Install in the reverse order of work.

Do not damage the joint claws during
removal.
2-10