Air Cleaner; Spark Plug - KYMCO Dink-R 150 Manual

3
. INSPECTION/ADJUSTMENT

AIR CLEANER

Air cleaner element replacement
Remove the eight screws.
Remove the air cleaner cover.
Remove the air cleaner element and replacement
new one.
＊
 The air cleaner element has a viscous type
paper element.
compressed air.
 Be sure to install the air cleaner element
and cover securely.

SPARK PLUG

Remove the spark plug cap and spark plug.
Check the spark plug for wear and fouling
deposits.
Clean any fouling deposits with a spark plug
cleaner or a wire brush.
Specified Spark Plug:
Measure the spark plug gap.
Spark Plug Gap: 0.8 – 0.9mm
＊
When installing, first screw in the spark
plug by hand and then tighten it with a
spark plug wrench.
Torque: 0.9 kgf-m
3-5
Do not clean it with
CPR7EA-9 spark plug cap
0.8 – 0.9mm
Dink-R 150