Rear Wheel; Removal; Inspection; Installation - KYMCO AHG5 Service Manual

15. REAR ASSEMBLY

5. Rear Wheel

5.1.

Removal

Remove the exhaust muffler.
Remove the rear brake caliper.
Remove the rear fork.
Remove the rear axle collar.
Remove the rear wheel.
5.2.

Inspection

Measure the rear wheel rim runout.
5.3.

Installation

Apply a proper amount of grease on the rear
axle before installation.
Install in the reverse order of work.
Torque:
Rear shock absorber lower mount bolt:
35～45N-m
Rear axle nut: 120 N-m
15-10
DT X360
Rear axle