4. LUBRICATION SYSTEM
DT X360
3. Engine oil
See the chapter 3 for more information.
4. Oil Pump
4.1. Removal
Starter idle gear & Shaft
Drain the engine oil.
Remove the alternator cover, fly wheel,
starter idle gear, shaft, pins and starter
driven gear.
Pins
Starter driven gear
Remove the bolt and then oil pump cover.
Bolts
Cover
Pry the snap ring off and remove the oil
Oil Pump Driven Sprocket
pump driven sprocket, then remove the oil
pump drive chain.
Inspect the oil pump drive chain and
sprocket for signs of wear and damage.
Replace the parts as needed.
Oil Snap Ring
4-6