Air Cleaner; Spark Plug - KYMCO Downtown 300i ABS Service Manual

3. INSPECTION/ADJUSTMENT

AIR CLEANER

AIR FILTER REPLACEMENT
Remove the body cover.
Remove seven screws attaching to the air
cleaner cover.
Remove six screws attaching to the filter.
Check the filter and replace it if it is
excessively dirty or damaged.
CHANGE INTERVAL
More frequent replacement is required when
riding in unusually dusty or rainy areas.
＊
 The air cleaner element has a viscous
type paper element. Do not clean it
with compressed air.
 Be sure to install the air cleaner
element and cover securely.

SPARK PLUG

Remove the spark plug cap and spark plug.
Check the spark plug for wear and fouling
deposits.
Clean any fouling deposits with a spark plug
cleaner or a wire brush.
Specified Spark Plug: NGK-CR7E
Measure the spark plug gap.
Spark Plug Gap: 0.6 – 0.7 mm
＊
 When installing, first screw in the spark
plug by hand and then tighten it with a
spark plug wrench.
Torque:17.2 N-m
Downtown 300i ABS
Air Cleaner Cover
Spark Plug
Cracks
Damage
Gap
｝
Wear
Fouling 0.6~0.7 mm
Deposits
Deformation
3-6