KYMCO AHG5 Service Manual page 187

10. A.C. GENERATOR & STARTER CLUTCH
DT X360
Loosen the water pump hose clamp with a #2 Phillips screwdriver. Slide up the clamp and
free the coolant hose from the water pump. Allow any remaining coolant to drain into a
suitable container.
Loosen the right crankcase coolant hose clamp with a #2 Phillips screwdriver. Slide up the
clamp and free the coolant hose from the right crankcase cover. Allow any remaining
coolant to drain into a suitable container.
10-5