Test Run - AUMA SAVEx 07.2 Operation Instructions Manual

SAVEx 07.2 SAVEx16.2/SARVEx 07.2
ACVExC 01.2 Non-Intrusive
Selection:
Log on user
Change value
10.4.

Test run

SARVEx16.2 Control unit: electronic (MWG)
4. Use Up ▲ Down ▼ to select:
▶ Speed internal1 M1930
▶ Speed internal2 M1931
▶ Speed internal3 M1932
▶ Speed internal 4 M1933
▶ Speed rem. min. M1936
▶ Speed rem. max M1937
The black triangle ▶ indicates the current selection.
5. Press Ok.
Display shows the set value.
The bottom row indicates: Edit Esc
6. Press Edit.
Display indicates:
- Specialist (4) → continue with step 7
- in bottom row Up ▲ Down ▼ Esc → continue with step 11
7. Use Up ▲ Down ▼ to select user:
Information: Required user level: Specialist (4) or higher
The symbols have the following meaning:
- black triangle: ▶ = current setting
- white triangle: ▷ = selection (not saved yet)
8. Press Ok.
Display indicates: Password 0***
9. Enter password (→ enter password).
Display shows the set value.
The bottom row indicates: Edit Esc
10. Press Edit.
11. Enter new value for speed via
Information: The adjustable speed range is shown in round brackets.
12. Save new value via
Speed setting is complete.
13. Return to step 4 (Selection): Press
Only perform test run only once all settings previously described have been
performed.
Commissioning (basic settings)
Up ▲ Down ▼.
Save.
Esc.
69