Kt/Km Electrical Connection - AUMA SAVEx 07.2 Operation Instructions Manual

SAVEx 07.2 SAVEx16.2/SARVEx 07.2
ACVExC 01.2 Non-Intrusive
6.3.

KT/KM electrical connection

Short description
SARVEx16.2 Control unit: electronic (MWG)
Table 14: Versions of the AUMA plug/socket connector
Electrical con- Figure
nection
KT
KP
KES
Figure 24: KT/KM electrical connection
[1] Terminal carrier with screw-type/spring clamp terminals
[2] Connection frame
Figure shows KT version
KT plug-in electrical connection with screw-type terminals for power connection and
spring clamp terminals for control contacts.
KM version with additional support terminals (terminal blocks) via terminal carrier.
Properties
Plug-in integral terminal connection
with enlarged terminal compartment
Plug/socket connector with terminal
board
Plug-in terminal connection with en-
larged terminal compartment
Electrical connection
For description
and assembly
refer to chapter
➭ page 29,
KT/KM electrical
connection
➭ page 35,
KP/KPH electrical
connection
➭
page 39, KES
electrical connec-
tion
29