AUMA SAVEx 07.2 Operation Instructions Manual page 12

Name plate
12
SAVEx 07.2 SAVEx16.2/SARVEx 07.2
Approval plate in explosion-proof version
[1] Ex symbol, CE mark, number of test authority
[2] Ex certificate (number)
Classification:
[3] Electrical gas explosion protection
[4] Not used
[5] Non-electrical explosion protection
[6] Threads for line bushings at electrical connection
[7] Not used
Descriptions referring to name plate indications
Table 1:
Description of type designation (with the example of SAVEx 07.2-F10)
SAVEx 07.2 -F10
SAVEx
07.2
F10
Table 2:
Description of actuator controls type designation (with the example of ACVExC 01.2)
ACVExC 01.2
ACVExC
01.2
Ex marking
Table 3:
Marking for explosion protection (example of /-a3b1)
a 3 b
Not used
a Motor type
a = ADY: 3-phase AC motor (for 3-phase mains voltage via frequency converter)
ASY: 3-phase motor (for 1-phase mains voltage via frequency converter)
3 Protection type of electrical connection
3 = Terminal compartment Ex e increased safety
4 = Terminal compartment Ex d flameproof enclosure
b
SARVEx16.2 Control unit: electronic (MWG)
Type SA = Multi-turn actuators for open-close duty
Type SAR = Multi-turn actuators for modulating duty
V = Variable speed
Ex = explosion-proof version
Size
These instructions apply to sizes 07.2, 07.6, 10.2, 14.2, 14.6, 16.2
Flange size
Type AC = Actuator controls
V = variable speed
ExC = explosion-proof version
Size 01.2
1
Protection type of position transmitter
a = Without intrinsically safe electric circuit
b = Electric circuit Ex i Intrinsic safety (RWG 5020.2Ex)
1 Protection type of fieldbus
1 = Without intrinsically safe Ex ic fieldbus connection
3= Ex ic intrinsically safe fieldbus connection
ACVExC 01.2 Non-Intrusive