AUMA SAVEx 07.2 Operation Instructions Manual page 76

Corrective action
76
SAVEx 07.2 SAVEx16.2/SARVEx 07.2
2. Return to the main menu and select the simulation value in parameter TMS
proof test M1950: Select Thermal test.
3. Activate motor protection simulation: Press Ok push button.
The safety function is correct if no fault signal is displayed.
4. Reset simulation: Press Ok push button or exit the simulation menu and reset
the selector switch to its initial position.
SARVEx16.2 Control unit: electronic (MWG)
ACVExC 01.2 Non-Intrusive