AUMA SAVEx 07.2 Operation Instructions Manual page 57

SAVEx 07.2 SAVEx16.2/SARVEx 07.2
ACVExC 01.2 Non-Intrusive
SARVEx16.2 Control unit: electronic (MWG)
For further information, please also refer to <Corrective action>.
Function check (S0009)
The S0009 indication shows function check indications according to the NAMUR
recommendation NE 107.
If an indication has occurred via the function check, the display shows S0009:
the number of indications occurred
a blinking triangle with a spanner after approx. 3 seconds
Figure 67: Function check
For further information, please also refer to <Corrective action>.
Maintenance required (S0010)
The S0010 indication shows maintenance indications according to the NAMUR
recommendation NE 107.
If such an indication has occurred, the display shows S0010:
the number of indications occurred
a blinking square with a oil can after approx. 3 seconds
Figure 68: Maintenance required
For further information, please also refer to <Corrective action>.
Failure (S0011)
The S0011 indication shows the causes of the failure indication according to the
NAMUR recommendation NE 107.
If such an indication has occurred, the display shows S0011:
the number of indications occurred
a blinking circle with a cross after approx. 3 seconds
Figure 69: Failure
For further information, please also refer to <Corrective action>.
Indications
57