General Configuration Screen - Cabletron Systems 2E48-27R User Manual

5.7

GENERAL CONFIGURATION SCREEN

The General Configuration screen,
system date and time, IP address and subnet mask, the default gateway,
the TFTP gateway IP address, and the operational mode. Also, clear the
NVRAM, set the screen refresh time, the screen lockout time, the IP
fragmentation, the COM port configuration, and monitor the total time
(uptime) that the device has been running.
To access the General Configuration screen from the Device
Configuration Menu screen, use the arrow keys to highlight the
GENERAL CONFIGURATION menu item and press ENTER. The
General Configuration screen displays.
Event Message Line
Device Type: 2E48-27R
MAC Address:
IP Address:
Subnet Mask:
Default Gateway:
TFTP Gateway IP Addr:
Operational Mode: [802.1D SWITCHING]
Com: [ENABLED]
Clear NVRAM [NO]
SAVE
The following briefly explains each General Configuration screen field:
MAC Address (Read-Only)
Displays the base physical address of the 2E4X-27R.
2E48-27R/2E49-27R User's Guide
2E48-27R LOCAL MANAGEMENT
General Configuration
00-00-ID-00-00-00
0.0.0.0
255.255.0.0
NONE DEFINED
0.0.0.0
Application:
IP Fragmentation [ENABLED]
Figure 5-9 General Configuration Screen
General Configuration Screen
Figure 5-9, allows the user to set the
Firmware Revision:
BOOTPROM Revision: XX.XX.XX
Device Date:
Device Time:
Screen Refresh Time:
Screen Lockout Time:
Device Uptime XX D XX H XX M
[LM]
EXIT
XX.XX.XX
10/11/97
14:23:00
30 sec.
15 min.
RETURN
23142_15
5-17