Chapter 3 Installation; Unpacking The 2E4X-27R - Cabletron Systems 2E48-27R User Manual

Only qualified personnel should install the 2E4X-27R.
This chapter provides all instructions required to install the 2E4X-27R. A
Phillips screwdriver is required to install options into the device or install
the device into a rack. Follow the order of the sections listed below to
correctly install the 2E4X-27R.
•

Unpacking the 2E4X-27R

• Installing Options
• Installing the 2E4X-27R (on a shelf or tabletop, or into a standard
rack) (Section
• Connecting to the Network
• Completing the Installation
3.1 UNPACKING THE 2E4X-27R
Unpack the 2E4X-27R as follows:
1. Open the box and remove the packing material protecting the
2E4X-27R.
2E48-27R/2E49-27R User's Guide
CHAPTER 3
INSTALLATION
(Section
(Section 3.2)
3.3)
(Section
(Section
3.1)
3.4)
3.5)
3-1