Chapter 3: Installation
2.
Verify the contents of the carton as listed in
Item
2E4X-27R
Antistatic wrist strap
Console Cable Kit
Rackmount Kit
Strain-Relief Bracket
Manual Accessory Kit
Power Cord (2E48-27R or 2E49-27R)
3.
Remove the black and amber tape seal on the non-conductive bag to
remove the 2E4X-27R.
4.
Perform a visual inspection of the device for any signs of physical
damage, and contact the Cabletron Systems Global Call Center if there
are any signs of damage. Refer to
3.2
INSTALLING OPTIONS
Install any optional equipment before proceeding to
NOTE
Section
If the 2E4X-27R is to be installed with an optional Fast Ethernet Interface
Module, refer to
instructions for the HSIMs are in the associated HSIM user's guide.
3-2
Table 3-1 Contents of 2E4X-27R Carton
3.3.
Appendix C
for installation instructions. The installation
Table
Section 1.5
for details.
2E48-27R/2E49-27R User's Guide
3-1.
Quantity
1
1
1
1
1
1
2