Routing Cables And Hoses - Dräger 8000 IC Instructions For Use Manual

O meter
2
Monitor O concentration with O
2
alarm limits, e.g. Dräger Oxydig:
Attach O Oxydig meter to rail with meter bracket.
2
Place sensor capsule in incubator.
Route sensor cable through one of the flexible hose
seals. Push sensor plug into socket on Oxydig until it
clicks into place.
Oxygen distributor
Attach oxygen distributor, order no. 2M 18 810,
to rail.

Routing cables and hoses

Route hoses and cables through the flexible hose
seals.
Push ventilation hoses and cables into clip at end of
hose support.
meter which has
2
Preparation
Oxygen therapy accessories
Cables and hoses
13