Dräger 8000 IC Instructions For Use Manual page 53

Measuring principles of sensors
Air temperature sensor
Skin temperature sensor
O concentration
2
Air humidity
Noise level inside the canopy
Air filter
Skin temperature control
Sensor
Certification marks*
Display component,
subject to calibration
Sensor** subject to
calibration
(2M 20 737)
Certification document*
Display component,
subject to calibration
Sensor** subject to calibration
Calibration tolerances*
Display component,
subject to calibration
Sensor** subject to calibration
Total measuring system
Classification
Electromagnetic compability (EMC)
BabyLink Incubator (optional)
ThermoMonitoring (optional)
Dimensions
(width x depth) mm
height in mm
Weight
* applies only in Germany
** or certified sensor with the same characteristic (400 Series, 2252 W @ 25 °C)
NTC x 2
NTC
galvanic cell
capacitive
<49 dB (A) at 50 Hz;
<56 dB (A) at 60 Hz
Particle class P 2, in accordance with DIN 3181, factor 2 %
Use only authentic Dräger sensors (see Order List, p. 57)
15.22
87.06
15.14
91.10
lB.13-78/87
IB.9.13-205/91
±0.2 °C
±0.1 °C
±0.3 °C
The incubator complies with DIN-VDE 0750, Part 1,
EN 60601-1, IEC 601-1 and IEC 601-2-19
m
Type B
according to EN 60601-1-2
serial interface for output of incubator
data (actual values, set values, alarms)
2nd skin temperature sensors to display peripheral skin
temperature.
960 x 680
1325 to 1525
89 kg
Technical data
53