Dräger 8000 IC Instructions For Use Manual page 11

Fitting pillar
For mounting accessories, such as
infusion pumps
instrument trays
infusion stand
Fit according to assembly instructions.
Set to low working height before transport.
Swivel table
For small items, maximum load 3 kg
Attach clamp on swivel table to pillar and tighten
screw.
Make sure that swivelling area is clear.
Swivel cupboard
To move swivel cupboard on right of incubator to left
or
to fit an additional swivel cupboard:
Push Allen screw up through unit from below and
screw firmly to unit mounting.
Insert extra trays.
Store whatever is needed in them.
Do not store anything under the swivel cupboard.
The maximum load on the incubator must not exceed
25 kg.
Preparation
Accessories
11