Preparing Oxygen Therapy Accessories - Dräger 8000 IC Instructions For Use Manual

Preparation

Preparing oxygen therapy accessories

Preparing oxygen therapy accessories
Oxygen enrichment of incubator air with oxygen control
1 Screw O connecting hose underneath incubator.
2
Connect probe to terminal of medical gas pipeline
O supply in "parking position".
2
Oxygen enrichment without O
If oxygen control module is faulty
Follow Instructions for Use of equipment being used.
Monitor O concentration.
2
O flowmeter
2
Attach O flowmeter to rail.
2
Fit hose to connector on O
2 to O connector underneath incubator.
2
Push probe on O connecting hose into the medical
2
gas terminal unit, only as far as "parking position"
initially.
Oxygen limiter
If an oxygen limiter is going to be used:
Unscrew connector on O
oxygen limiter on.
Connect hose.
12
control
2
flowmeter and
2
flowmeter and screw
2
1
2