Dräger 8000 IC Instructions For Use Manual page 10

Preparation
Accessories
Mounting plate
For monitors and ventilators with latching system for
standard Dräger housings 1/2B, e.g. Babylog 8000.
Maximum load must not exceed 20 kg.
Attach plate to rail and tighten clamp.
Fixing equipment to mounting plate
Example: Babylog 8000
Remove foot strips from Babylog.
Tilt Babylog forward by about 45° .
1 Insert front latches into slots in mounting plate.
2 Lower Babylog, insert the rear latches into slots in
mounting plate and secure at back with knurled
screws.
BabyScreen
Optional for ThermoMonitoring
Attach holder to rail.
Engage BabyScreen in holder.
Follow relevant assembly instructions.
Infusion stand
Attach stand to rail with rail clamp and tighten.
10
2
1
D