Snap Server And Expansion Array Hardware Specifications - Adaptec 5325302057 User Manual

Snap Server and Expansion Array Hardware Specifications

Snap Server and Expansion Array Hardware
Specifications
This section provides hardware specifications for the Snap Server 700i
Series and SANbloc S50 expansion arrays. Specifications are subject to
change without notice; for updates to and further information on the
specifications, see http://www.snapserver.com.
Use only qualified components purchased from an authorized Adaptec
Caution
reseller to service Snap Server storage products. Qualified means that Adaptec
technicians have tested and verified that the component operates properly with the
Snap Server and other network components. Failure to use qualified components
may seriously impact data availability, potentially lead to data loss and corruption,
and will void your warranty.
Snap Server 700i Series Specifications
Feature
Network Connection
Dimensions
Power
Operating
Environment
Nonoperating
Environment
Regulatory
Certifications
196 Snap Server 700i Series User's Guide
Specification
Autosensing 10/100/1000Base-T, dual RJ-45 network
connectors, with support for load-balancing and failover.
Width .....................17.5 in (444.5 mm)
Depth .....................28.07 in (713 mm)
Height ....................1.75 in (44.45 mm), 1U
Weight ...................40 lbs (18.5 kg)
Power Rating: 400W, 100-240 VAC, 50-60Hz,
Input Current: 3.4A (RMS) for 115VAC, 2.3A (RMS) for 230VAC
Power Consumption: 290W (steady state), 360W (maximum)
Heat Dissipation: 990 BTUs/hr
50° F to 95° F (10° C to 35° C)
20% to 80% humidity (noncondensing)
Vibration: .10G at 10-300Hz Random for 120 min. max duration
Shock: 6 pulses of 33G for up to 2ms
Altitude: 0 ft. to 10,000 ft. (0m to 3,048m)
14° F to 149° F (-10° C to 65° C)
5% to 95% humidity (noncondensing)
Vibration: 2G at 5-500Hz for 90 min. max duration
Altitude: 0 ft. to 35,000 ft. (0m to 10,668m)
UL, cUL, CE, FCC Class A, TuV, NEMKO, CTick