Identifying The Ethernet Ports - Adaptec 5325302057 User Manual

• Standardize on a single vendor for external hardware components — Not only
will standardization on a single vendor minimize the chance of unforeseen
interoperability failures, it will also simplify troubleshooting procedures.
(1) For a complete list of qualified components, including replacement parts
Notes
and installation instructions, see http://www.snapserver.com/support; (2) To find
an authorized reseller in your area, go to
Where to Buy

Identifying the Ethernet Ports

The Snap Server 700i Series have an on-board NIC card with two Ethernet ports
(eth0 and eth1). In addition, the Snap Server 720i has a single-port NIC (eth2) and
the Snap Server 730i and 750i have a dual-port NIC (eth2 and eth3). The illustration
below identifies the location of each of these Ethernet ports.
tab.
eth0
Identifying the Ethernet Ports
http://www.snapserver.com
eth1
eth3
eth2
Appendix C Your Snap Server 700i Series
and click the
189