Adaptec 5325302057 User Manual page 201

SANbloc S50 Hardware Checklist
The following checklist shows the required and optional hardware to install an S50 ,
and indicates whether a component comes with the server or must be supplied by
the customer.
Component Description
Connection SAS Cable (1 per enclosure)
and Power Required to connect the expansion array to the host Snap Server 700i
Series.
Power Cables (2 per enclosure)
Required to plug into the mains.
APC-Brand UPS Device(s) (optional)
The S50 should be connected to the same UPS as the Snap Server to
which it is attached.
Rack Rack Mount Brackets
Two (2) rack mount shelves and screws for attaching the server to a
rack.
S50 expansion arrays are designed for use with EIA-compliant 4-post
racks.
Snap Server and Expansion Array Hardware Checklists
EIA-Compliant Rack
Appendix C Your Snap Server 700i Series 195