Adaptec 5325302057 User Manual page 112

Updating the Adaptec OnTarget Operating System
Checking the Current Image
To see what image is currently running:
In the Enterprise View, select the iSCSI Storage Appliance you want.
1
In the Physical Devices View, select the controller (shown at right).
2
In the
Actions
3
The Select Image window opens.
In the example above, Image 1 is the image running currently. Image 1 is also the
image that will be used the next time the iSCSI Storage Appliance is rebooted or
powered on.
Reverting to the Previous Image
Adaptec Storage Manager stores two versions (or images) of Adaptec OnTarget at a
time. If you experience problems with a newly downloaded image, you can revert
to the previous one. You can also return from the previous image to the new one, if
required.
To choose the image to use the next time the iSCSI Storage Appliance is restarted or
powered on:
Follow Step 1 to Step 3 of "Checking the Current Image" on page 106.
1
The Select Image window, select the controller image file you want, click
2
Click to confirm the image change.
Yes
3
106 Snap Server 700i Series User's Guide
menu, select
Select controller image
.
Example:
Select Image 1 to run when restarting
Image 2 is currently running
.
OK