Step 2: Configuring The Iscsi Storage Appliance - Adaptec 5325302057 User Manual

Step 2: Configuring the iSCSI Storage Appliance

Enter the host name or TCP/IP address of your iSCSI Storage Appliance, then
3
click . The TCP/IP address appears on the front panel LCD display of your
Add
Snap Server 700i Series.
An iSCSI Storage Appliance can be associated with (or added to) only one
Note
Management Service at a time.
If prompted, click
Appliance, then click
iSCSI Storage Appliance was added to another Management Service previously.)
The default password is
The iSCSI Storage Appliance is added to Adaptec Storage Manager.
Step 2: Configuring the iSCSI Storage Appliance
The wizard comprises three configuration steps, listed in the left panel:
• Configure iSCSI Storage Appliance
• Create RAID pools
• Provision Storage
This chapter explains the steps in the order in which they're presented in the
wizard.
To configure your iSCSI Storage Appliance:
Select the iSCSI Storage Appliance (shown as 'OnTarget' in the previous figure),
1
then click
36 Snap Server 700i Series User's Guide
, enter the Administrator password for the iSCSI Storage
OK
. (You will only be prompted for a password if this
Add
.
admin
.
Next