Adaptec 5325302057 User Manual page 51

Create an Auto-discovery Control List. (An auto-discovery control list allows one
11
or more specified iSCSI initiators to discover an iSCSI target while preventing
other iSCSI initiators from discovering it. See page 77 for more information.)
Click
Add Initiator
a
The Add iSCSI Initiator window opens.
Enter the IQN (iSCSI Qualified Name) assigned to the iSCSI initiator.
b
Enter a name (or alias) for the initiator. The name must begin with a alphabetic
c
character, and can contain only letters and numbers.
(Optional—VMware ESX users only) Click
d
permanent discovery session
(Optional—Advanced users only) Click
e
Protocol Data Unit, iSCSI ping, and discovery settings.
Refer to your iSCSI initiator's documentation for more information about
Note
the advanced settings.
Click .
OK
f
The iSCSI initiator appears in the Initiators drop-down menu.
Note
Repeat Steps a to f to add more initiators, if required.
g
From the Initiators drop-down menu, select the initiator you want.
h
From the list of logical devices, select the logical device(s) that you want the
i
selected initiator to discover, then click the right arrow (>).
Repeat Steps h and i for each iSCSI initiator.
j
Each logical device can support up to 32 iSCSI initiators. For more
Note
information about auto-discovery control lists, see page 77.
Click , review the configuration summary, click
Next
k
.
.
Chapter 4 Setting Up Your iSCSI Storage Appliance and IP SAN
Step 4: Provisioning Storage to Your Systems
Advanced options,
to enable or disable
Advanced settings
Apply
then enable
Uses
, then click .
Yes
45