Adaptec 5325302057 User Manual page 213

Property Values
ADDLOCAL Note: Use commas to separate multiple values.
(Required) l ALL—Installs all of the following features. If you specify ALL, do not also
specify any of the following values.
l Agent—Installs the Adaptec Storage Manager Direct Attached Storage
Agent. If this feature is installed, the machine will reboot if certain RAID
controllers that use the filter driver are installed. If necessary, use the
REBOOT property to suppress this.
l ASMReadme—Installs the Readme file in its Start menu shortcut.
l CLITools—Installs the Command Line Interface tool.
l Console—Installs the Adaptec Storage Manager GUI.
l DSM (Windows 2000 and Windows Server 2003 x86 or x64 only)—
Installs the MPIO DSM. Currently, the MPIO DSM CAN NOT BE
INSTALLED SILENTLY; user intervention is required to begin the DSM
driver installation and to reboot following installation. If necessary, use
the REBOOT property to suppress this. This value is supported by
Windows 2000 and Windows Server 2003 x86 only.
l ManagementService—Installs the iSCSI Storage Management Service.
Requires you to set user name and password properties.
l SNMP Support—Installs SNMP support for Adaptec Storage Manager.
Requires the Agent feature to be installed, also. If you select the
SNMPSupport feature, the Agent feature is automatically included, even
if you don't specify it.
l VDSExternal (Windows Server 2003 R2 x86 only)—Installs support for
VDS for iSCSI storage. Requires Microsoft iSCSI Software Initiator v.2.02
or higher. Also requires that you also set the MGMTLOC, MGMTUSER,
and MGMTPASS properties.
l VDSProvider (Windows Server 2003 x86 only)—Installs support for VDS
for direct attached storage RAID controllers.
l VSSExternal (Windows Server 2003 R2 x86 or x64 only)—Installs
support for VSS. Requires Microsoft iSCSI Software Initiator v.2.02 or
higher. Also requires that you also set the MGMTLOC, MGMTUSER, and
MGMTPASS properties.
l WinAgent (Windows Server 2003 x86 only)—Installs the iSCSI Storage
management agent. Requires Microsoft iSCSI Software Initiator v.2.02
or higher. Also requires that the DSM and VSSExternal features also be
installed.
Appendix F Completing a Silent Windows Installation
Available Properties and Values
207