Connect To A Snap Server Using Snap Server Manager (Ssm) - Adaptec Snap Server 110 User Manual

Step 3: Connect to the Server for the First Time
Complete the Initial Setup Wizard.
5
For instructions on using the Initial Setup Wizard, see page 11.

Connect to a Snap Server Using Snap Server Manager (SSM)

Use this procedure if your network does not assign IP addresses automatically or if
you cannot resolve the server name to an IP address.
Install SSM.
1
To download and install SSM, locate the Install_SSM.html file on the root of your
Snap Server User CD. Double-click the file to open it and follow the instructions.
SSM can be installed on several client platforms, including Windows,
Note
Macintosh OS X, Linux, and UNIX. If you plan to run SSM on a Macintosh client,
you must upgrade the client to MacOS 10.2 or higher (required for JRE 1.4.0 or
higher support).
Upon startup, SSM displays the IP address of each Snap Server on its local
network segment.
Launch SSM.
2
Once you have installed SSM, launch it using one of the methods described in the
following table:
Operating System
Microsoft Windows 98/NT/XP/
2000/2003/Vista
Macintosh v10.2 or higher
UNIX/Linux
10 Snap Server 110/210 User Guide
Procedure
Click Start. Point to Programs > Snap Server
Manager, then select Snap Server Manager.
Open the Snap Server Manager folder and double-
click the Snap Server Manager icon.
For default options:
cd to home directory, then run the Snap Server
Manager command: ./Snap_Server_Manager
If you selected not to create links:
cd to home directory, then cd to the Snap Server
Manager directory, and run the Snap Server Manager
command: ./Snap_Server_Manager