Planning Your Ip San Configuration And Setup - Adaptec 5325302057 User Manual

Planning Your IP SAN Configuration and Setup

Planning Your IP SAN Configuration and Setup
As you plan your IP SAN, use this table to understand which Adaptec Storage
Manager components can or must be installed on your IP SAN systems.
Install...
Required GUI and Agent
Management Service At least one system on
Optional Windows Support
(see page 17)
See page 203 for a complete list of supported Adaptec Storage Manager
Note
features by OS. For additional help planning your IP SAN, see "Sample IP SAN
Configurations" on page 19.
Maximum Supported Connections
When building or expanding your IP SAN, ensure that you don't exceed these
connection limitations for your iSCSI Storage Appliance. To each separate iSCSI
Storage Appliance, you can connect:
• Up to 100 Serial Attached SCSI (SAS) plus 4 SATA II disk drives
• Up to 48 SATA II disk drives
Re-initialize any previously used disk drive that was originally initialized by
Note
another RAID controller before connecting it to your iSCSI Storage Appliance. Refer
to your operating system documentation for instructions.
18 Snap Server 700i Series User's Guide
On...
At least one system on
your IP SAN
the same subnet as your
iSCSI Storage Appliance
(Adaptec recommends it
be the same system as the
GUI and Agent)
All Windows 2003
systems on your IP SAN
that will be iSCSI Storage
Hosts
Any Windows Vista
systems on which you
want to use third-party
storage management
tools.
To...
Build, manage, and
monitor your IP SAN
Build, manage, and
monitor your IP SAN
Provision storage
automatically, create
volume snapshots, create
synchronous mirrors, use
Adaptec Storage Manager
with non-Adaptec storage
management tools