Installing On Linux - Adaptec 5325302057 User Manual

Installing on Linux

Installing on Linux
This section describes how to install Adaptec Storage Manager on systems running
Linux. Adaptec Storage Manager includes the Java Runtime Environment (JRE).
See page 25 for a list of supported Linux OSs. Not all Adaptec Storage Manager
features are supported by Linux. See "iSCSI Storage Feature Support" on page 14
for more information.
Before You Begin
You will need the User CD to complete this task.
If you are installing on systems running Red Hat Enterprise Linux, you will need to
install packages from the Red Hat Linux installation CD.
The version strings in the file names may be different from what's shown in
Note
the examples below. Check the version strings on your Red Hat installation CD.
• Install these two packages:
compat-libstdc++-7.3-2.96.122.i386.rpm
compat-libstdc++--devel-7.3-2.96.122.i386.rpm
For example, type:
rpm --install /mnt/compat-libstdc++-7.3-2.96.122.i386.rpm
where
mnt
• (Red Hat Enterprise Linux 4 only), install this package:
xorg-x11-deprecated-libs-6.8.1-23.i386.rpm
• (Red Hat Enterprise Linux 5 only), install one of these packages:
libXp-1.0.0-8.i386.rpm
or
libXp-1.0.0-8.x86.rpm
If a previous version of Adaptec Storage Manager is installed on your system, you
must remove it before beginning this installation. Any customization files you
created with the previous version are saved and used in the upgrade.
To remove Adaptec Storage Manager GUI, enter this command:
rpm --erase StorMan.
To uninstall the Management Service, enter this command:
sh /etc/init.d/asm-mgmt stop erase the rpm - rpm --erase asm-mgmt
30 Snap Server 700i Series User's Guide
is the mount point of the CD-ROM drive.
(for a 32-bit OS)
(for a 64-bit OS)