Adaptec 5325302057 User Manual page 92

Adding More Components to Your IP SAN
Adding an iSCSI Storage Appliance
If you have installed additional iSCSI Storage Appliances, follow these instructions
to add them to Adaptec Storage Manager.
An iSCSI Storage Appliance can be associated with (or added to) only one
Note
Management Service at a time.
In the Enterprise View, select the Management Service.
1
In the Actions menu, click
2
The Add iSCSI Storage Appliance window opens.
Enter the host name or TCP/IP address of your iSCSI Storage Appliance, then
3
click . The TCP/IP address appears on the front panel LCD display of your
Add
Snap Server 700i Series.
The iSCSI Storage Appliance is added to the Management Service.
Using the Wizard
In the Enterprise View, select the Management Service.
1
In the Actions menu, click
2
The wizard opens.
Click
Add new iSCSI storage appliance
3
The Add iSCSI Storage Appliance window opens.
Enter the host name or TCP/IP address of your iSCSI Storage Appliance, then
4
click . The TCP/IP address appears on the front panel LCD display of your
Add
Snap Server 700i Series.
The iSCSI Storage Appliance is added to the Management Service.
Adding an iSCSI Storage Host
To add a new iSCSI Storage Host to Adaptec Storage Manager:
In the Enterprise View, select the Management Service.
1
In the Actions menu, click
2
The Add iSCSI Storage Host window opens.
Enter the host name of an iSCSI Storage Host. Alternatively, if you assigned a
3
static IP address to the iSCSI Storage Host, enter it instead of the host name.
Click .
Add
4
The system is added to the Management Service. To provision storage to the
system, see "Provisioning Storage Automatically" on page 40.
86 Snap Server 700i Series User's Guide
Add iSCSI storage appliance
.
Configure SAN
.
Add iSCSI storage host
.
.