Adaptec 5325302057 User Manual page 123

Disk Drive LEDs
Disk drive LEDs on the Snap Server 700i Series are located beneath the status lights
on the bezel. For all disk drive LEDs, the left light indicates drive status; the right
light indicates drive activity. They operate as follows:
Status LED (left) Activity LED (right)
Solid green Off
Solid green Blinking green
Solid amber Off
Off Off
You can blink a disk drive from Adaptec Storage Manager by right-clicking
Note
the drive and selecting
Disk Drives" on page 103 for instructions.
Power Supply Module Indicator Lights
The LED on a 700i Series power module is identified in the following illustration.
Status LED
Power
Solid green
Blinking green
Solid amber
Off
Using Status and Drive Light Behavior to Monitor Components
Disk drive installed properly but is not active
Disk drive installed properly and is active
Disk drive installed, but not working
correctly
No disk drive installed
. See "Blinking Appliances, Enclosures, and
Blink disk drive
Description
The module is operating properly.
The module has failed or is not connected.
The module has failed, is not connected, or the server has
been turned off.
Chapter 10 Monitoring Status and Activity 117