Example Command Line Installations - Adaptec 5325302057 User Manual

Example Command Line Installations

Property
MGMTPASS
REBOOT
(Not Required)
Example Command Line Installations
• To install the basic options, which include the GUI, Agent, Readme, and SNMP
Support:
setup.exe /s /v"/qn ADDLOCAL=Console,Agent,
• To install just the Agent and suppress a reboot at the end of installation:
setup.exe /s /v"/qn ADDLOCAL=Agent REBOOT=ReallySupress"
• To install all features silently, on a machine named COMP1234, then force a
reboot:
setup.exe /s /v"/qn ADDLOCAL=ALL USERNAME=admin PASSWORD=pass
REBOOT=Force MGMTLOC=COMP1234 MGMTUSER=admin MGMTPASS=pass"
This will install the DSM feature, which cannot be installed silently. You
Note
must click the Windows driver installation dialog box to successfully complete
the DSM installation. (This is currently a Windows limitation.)
• To install only the CLI Tools and suppress a reboot:
setup.exe /s /v"/qn ADDLOCAL=CLITools REBOOT=ReallySuppress"
• To install the GUI feature to a different installation path:
setup.exe /s /v"/qn ADDLOCAL=Console INSTALLDIR=\"C:\Adaptec Storage Manager\""
• To install and have setup wait until the install finishes before it closes:
start /WAIT setup.exe /w /s /v"/qn ADDLOCAL=Console,Agent REBOOT=ReallySupress"
• To install the VDS/VSS Services with support for a remote Management Service
(already installed on machine COMP1234):
setup.exe /s /v"/qn ADDLOCAL=VDSExternal,VSSExternal MGMTLOC=COMP1234
MGMTUSER=admin MGMTPASS=pass"
208 Snap Server 700i Series User's Guide
Values
Specifies the Management Service log-in password to set up VDS/VSS
access. If you are installing the Management Service onto the local
computer, this value is the same as the PASSWORD property.
*This Property is required only if VDSExternal or VSSExternal features are
installed.
l Force—Forces a reboot at the end of the installation.
l Suppress—Suppresses a reboot unless files were in use and could not
be overwritten during installation.
l ReallySuppress—Suppresses all reboots at the end of the installation.
NOTE: A reboot is only forced by the Adaptec installer if you have installed
the DSM feature, or if any files can't be overwritten.
,
ASMReadme,SNMPSupport"