Adaptec 5325302057 User Manual page 174

iSCSI Configuration for Microsoft Windows
Configuring the QLA4050/4052 using Microsoft's iSCSI Initiator Applet
Open the Control Panel and select
1
Select
Device Manager
2
, and select
Adapter
Select the HBA Information tab and enter the iSCSI name for the QLA4050/4052
3
adapter.
Select the TCP/IP settings tab and enter the IP address and other network
4
information.
When you have finished entering information, click
5
with "Connecting to a Logical Device (iSCSI Target) Using the MS Initiator" on
page 159.
To enter target information, refer to "Configuring the MS Initiator Connection to
6
the iSCSI Storage Appliance (Target Portal)" on page 158.
• In
iSCSI Initiator Properties > Targets
target.
• In the Advanced Settings dialog, set the Local adapter to
Adapter...
Preparing Logical Devices for Windows Deployment
Create volumes on the iSCSI target using the Windows Disk Management Tool.
Refer to "Formatting a Logical Device Using the Windows Disk Management Tool"
on page 160 for instructions.
168 Snap Server 700i Series User's Guide
, select
SCSI and RAID controllers
.
Properties
, then click .
OK
Administrative Tools > Computer Management
, right-click
Apply Changes
, log on to the iSCSI Storage Appliance
.
QLogic iSCSI
and proceed
QLogic iSCSI