Adaptec 5325302057 User Manual page 168

iSCSI Configuration for Microsoft Windows
Editing the Windows Registry for MS Exchange Server or MS SQL Server
Install Exchange Server 2003 and configure it to use the logical device as the
1
location to store database files.
On a Windows workstation running Windows 2000, enter this on the command
2
line:
regedt32
Navigate to the Key:
3
For Exchange Server:
a
HKey_Local_Machine > System > Current Control Set > Services > lanmanserver
For SQL Server:
b
HKey_Local_Machine > System > Current Control Set > Services > MSSQLServer
If the value
4
Select
Add Value
a
In the
Name
b
DependOnService
Click .
OK
In the Data box that opens, enter:
5
MSiSCSI
Click , and then close the registry.
OK
Reboot the Windows server.
6
Configuring Shares to Logical Devices (MS Initiator)
When using the Microsoft initiator, shares to logical devices may not automatically
reconnect when the Windows system hosting the shares is rebooted. There are two
methods to resolve this issue:
• Share an iSCSI target that has an assigned drive letter. This method requires
changes to the Windows registry and is described in Microsoft Knowledgebase
article #870964 (http://support.microsoft.com/kb/870964).
• Mount the logical device to a folder on an existing NTFS volume as described in
"Mounting a Logical Device Without a Drive Letter". This method does not
require changes to the Windows registry and is described below.
162 Snap Server 700i Series User's Guide
already exists, double-click it. If it does not, create it:
DependOnService
from the Edit menu to open the Add Value dialog box.
field, enter: