Adaptec 5325302057 User Manual page 47

Enter a size for the volume. (Adaptec Storage Manager won't allow you to enter a
3
number greater than the amount of available pool space.) Select the capacity units
from the drop-down list (GB, for instance).
Enter a name (or label) for the volume. Use a meaningful name that will help you
4
easily identify it later.
Select a drive letter for the volume. Only unused drive letters are available in the
5
Drive Letter of Empty Directory drop-down list.
(Optional) Click the
6
Adaptec highly recommends using CHAP authentication. Avoid disabling
Note
authentication. (See "Controlling Access to Your IP SAN with Authentication" on
page 79 for more information.)
In the Pools list, select the pool in which to create the volume.
7
The Available Space column of the Pools list shows which pools have sufficient
space for the new volume. When you select a pool, the amount of available space
is automatically adjusted.
If you have no more available pool space, skip to Step 9.
If you have pool space available and want to create additional volumes for this
8
iSCSI Storage Host, click
Repeat this step to continuing adding volumes for this iSCSI Storage Host, as
required.
arrow and adjust the settings as required.
Advanced settings
to open a new tab in the wizard.
Add volume
Chapter 4 Setting Up Your iSCSI Storage Appliance and IP SAN
Step 4: Provisioning Storage to Your Systems
41