Mitsubishi Electric Fatec GOT2000 Series Basic Training Textbook page 147

P O I NT
P O I
An adjustment of display area is required as illustrated below to keep part of alarm message from dropping out of
the frame.
400 Unable to communicate with CPU
3 AC down error
803 Transient error
Error message (Max. 64 digits)
Enlarge the size until the time of the alarms occurred is displayed on the right edge.
• When "Display detailed information on the target alarm" is selected, the alarm messages containing the
information to identify devices, objects, or functions that caused alarms are displayed.
• If alarm messages are not displayed entirely even though the display range has been adjusted, set [Display
Alarm] to [System Alarm] and set [Display Type] to [Flow] in the [Alarm Popup Display] dialog. (As the error
codes used for the GOT2000 series have been increased, system alarm messages are not displayed entirely in
VGA resolution.)
R e m a r k
R e m a k
Size change of object with shape
(1) Method of changing size
(a) Select the object to be changed in size.
(b) Position the cursor over the sizing handle, click and drag it to change the desired size.
Set in three lines.
The time of the alarms occurred (Fixed eight digits)
5. Drawing fundamentals
5.10 System alarm settings
1
2
3
4
5
6
5 - 65